Products - steps and vertical surfaces
Vertical Surfaces
The same resin bound finish on steps, skirtings and vertical surfaces, without slump.
A standard resin bound binder runs off a vertical surface. The Vertical Binder is a highly thixotropic, light-stable two-component polyurethane binder that holds 1-3 mm aggregate in place on steps and other vertical surfaces, so stairs, upstands and skirtings match the rest of the project. It also primes the vertical surface, and it cures waterproof and almost colourless, without discolouring with age.
Stays where it is laid
Highly thixotropic, so a 5-6 mm layer holds on a vertical surface without slumping.
Light-stable
Cures almost colourless and does not discolour with age.
Two parts, one to one
Part A and Part B mix 1:1 by weight in complete 1.8 kg kits, so nothing is weighed on site.
Matches the surface
Dried 1-3 mm aggregate, chosen to match the surrounding resin bound surface.
How it works
Mix, prime, trowel.
Mix the binder
Mix Part B thoroughly into Part A. Always mix complete kits.
Prime the surface
Apply about 0.5 kg of the mixed binder, just over a quarter of the kit, liberally to the clean, dry vertical surface.
Add the aggregate
Mix about 12.5 kg of dried 1-3 mm aggregate into the remaining binder until every stone is coated. Low-dust quartz usually needs less.
Trowel it on
Trowel the mix on evenly at 5-6 mm while the primer is still wet. Add no catalyst, accelerator or solvent; in cool weather the cure simply takes longer.
Technical data
Numbers you can specify against.
Where it works
Wherever the surface turns a corner.
Add Vertical Surfaces to your range
Exclusive territories, EU stock and a proven playbook behind you.
Become a distributor